{Guide to Assessment Validation pertaining to Vocational Training Bodies in the Australian landscape :

{Guide to Assessment Validation pertaining to Vocational Training Bodies in the Australian landscape :

Blog Article

Overview of Assessment Validation

RTOs have multiple obligations post-registration, including annual declarations, AVETMISS compliance, and promotional compliance. Among these tasks, validation of assessments is notably challenging. While validation has been reviewed in many posts, a review of the basics is necessary. ASQA describes assessment validation as granular review of the assessment process.

Essentially, assessment validation is focused on identifying which parts of an RTO’s assessment methods are effective and which need improvement. With a proper grasp of its key aspects, validation becomes less daunting. According to Clause 1.8 of the Standards for RTOs 2015, RTOs must ensure their assessment systems, including RPL, comply with the training package requirements and are conducted according to the Principles of Assessment and Rules of Evidence.

The standards mandate two forms of validation. The initial type of validation of assessments ensures compliance with the requirements of the training package within your organisation's scope. The other type verifies that assessments are conducted according to the principles of assessment and Rules of Evidence. This indicates that validation is performed both before and after the assessment. This article will discuss the primary type—validation of assessment tools.

What are the Two Types of Assessment Validation?

- Assessment Tool Validation: Also called pre-assessment validation or verification, involves the primary part of the rule, aimed at compliance with all unit requirements.
- Post-Assessment Validation: Pertains to the execution, ensuring RTOs conduct assessments in line with the Principles of Assessment and Rules of Evidence.

How to Conduct Assessment Tool Validation

Timing for Assessment Tool Validation

The aim of validating assessment tools is to ensure that all aspects, criteria for performance, and evidence of performance and knowledge are covered by your evaluation tools. Therefore, whenever you get new training materials, you must perform validation of assessment tools prior to student use. There's no need to wait for your next 5-year cycle validation schedule. Validate new resources right away to verify they are fit for student use.

Nevertheless, this isn't the only time to conduct this type of validation. Perform validation of assessment tools also when you:

- Modify your resources
- Integrate new training products on scope
- Review your course against training product updates
- Flag your learning resources as a risk during your risk assessment

The Australian Skills Quality Authority employs a risk-based approach for regulating RTOs and expects regular risk assessments. Therefore, student complaints about learning resources are an ideal time to conduct assessment tool validation.

Selecting Training Products for Validation

Bear in mind that this validation guarantees adherence of all learning resources before being used. All RTOs must validate training products for each subject unit.

Necessary Resources for Assessment Tool Validation

To start assessment tool validation, you will need the complete set of your educational resources:

- Mapping Document: The first document to review. It indicates which assessment items meet subject requirements, helping with faster validation.
- Learner/Student Workbook: Ensure it is suitable as an assessment tool during validation. Check if guidelines are clear and response areas are sufficient. This is a common issue.
- Assessor Guide/Marking Guide: Also check if guidelines for assessors are sufficient and if clear standards for each assessment item are provided. Clear standards are crucial for reliable assessment results.
- Other Related Resources: These may include evaluation checklists, registers, and forms designed separately from the workbook and assessor guide. Validate these to ensure they fit the assessment activity and comply with unit requirements.

Panel for Validation

Standard 1.11 specifies the requirements for panel members. It states assessment validation can be performed by one or more people. However, RTOs usually ask all educators and assessors to participate, sometimes including field experts.

Collectively, your assessment validation panel must have:

- Workplace Competencies and Current Professional Skills relevant to the unit under validation.
- Current Knowledge and Skills in Vocational Teaching and Learning.
- Either of the following credentials for training and assessment:
- TAE40116 Certificate IV in Training and Assessment or its successor.

Principles of Assessment

- Fairness: Is equal opportunity and access provided to everyone in the assessment process?
- Adaptability: Does the assessment offer various options to demonstrate competence based on different needs and preferences?
- Accuracy: Is the assessment an accurate tool for evaluating the required skills and knowledge?
- Consistency: Will the assessment produce consistent results every time?

Evidence Rules

- Relevance: Is the evidence appropriate to the requirements of the unit of competency?
- Completeness: Is there enough evidence to ensure that the learner has the skills and knowledge required?
- Originality: Does the assessment tool verify that the work is the candidate’s own?
- Timeliness: Is the evidence up-to-date with current industry practices?

Important Factors in Assessment Validation

Pay attention to the verbs in the unit specifications and ensure they are addressed by the assessment task. For example, in the unit CHCECE032 Baby and Toddler Care, one performance evidence check it out requirement asks students to:

- Change diapers
- Prepare and feed bottles, clean feeding equipment
- Prepare solid food and feed babies
- Respond to baby signs and cues properly
- Get babies ready for sleep and settle them
- Monitor and encourage age-appropriate physical exploration and gross motor skills

Common Pitfalls

Asking students to describe the nappy-changing process for babies under 12 months old does not meet the unit requirement. Unless the unit specification is meant to assess theoretical understanding (i.e., evidence of knowledge), students should be carrying out the tasks.

Watch Out for the Plurals!

Pay attention to the quantities. In our example, one of the unit requirements of CHCECE032 requires the students to complete the tasks at least once on two different babies under 12 months of age. Having students complete the tasks listed twice on just one baby won’t cut it.

All or Not Competent

Pay attention to itemized requirements. As mentioned earlier, if students perform only half the tasks listed, it’s not compliant. Each evaluation task must cover all specifications, or the student is incompetent, and the assessment tool is non-compliant.

Can You Be More Specific?

Each assessment item must have clear and specific benchmark answers to guide the assessor’s judgment on the student’s competence. Therefore, it’s crucial that your instructions do not baffle students or evaluators.

Avoid Double-Barrelled Questions

Not using double-barrelled questions makes it simpler for students to respond and for assessors to accurately assess student competence.

Ensuring Audit Compliance

Considering these requirements, you might wonder, “Don't resource developers provide audit guarantees?” However, with these guarantees, you must wait for an audit before they assist with noncompliance. This impacts your compliance record, so it's better to take a safe and compliant approach.

By following these recommendations and understanding the principles of assessment and Rules of Evidence, you can ensure that your assessment methods are compliant with the requirements set by ASQA and the SRTOs 2015.